SPECIFICATIONS

1.      DC Power Supplies Module

Fixed Output: +5V/1A, -5V/0.5A, +12V/0.5A, -12V/0.5A

Variable Output: +0V ~ +23V/0.5A, -0V ~ -23V/0.5A

2.      AC Power Supplies Module

19V–15V–9V–0V–9V–15V-19V

3.      Function Generator Modules

Sine, Triangle and Square waveform output

Frequency range: 1Hz to 1MHz in 6 decades

With fine adjust, Amplitude and DC offset control

TTL Mode: 1Hz to 1MHz in 6 decades

Six frequency ranges:

     1Hz to 10Hz

     10Hz to 100Hz

     100Hz to 1KHz

     1KHz to 10KHz

     10KHz to 100KHz

     100KHz to 500KHz

Sine wave output: 0 to 12V peak to peak variable

Triangle wave output: 0 to 8V peak to peak variable

Square wave output: 0 to 22V peak to peak variable

4.        Removable Solderless Breadboard Module

Interconnected nickel plated with a total of 2200 tie points nickel plated contact, fitted all DIP sizes and all components with lead and solid wire in diameter of AWG #22-30 (0.3-0.8mm)

5.        Two Logic Output Switches Module

       Provide two sets of logical output  &  

6.        Two Pulse Switches Module

          Provide two sets of pulse output  &  

2 units push button switch contain switches debouncer for eliminating the bounce caused by switch from "open" to "close" or from "close" to "open" position.       

7.      16-Bits LED Indicators with buffer Module

Sixteen LED's separate input terminals in three colors. (RED, Yellow & Green). The LED will be lighted up when input is at "HI Level", and it will be turned off when it is at no input or at "LO Level". Capable for Traffic Light Experiments.

8.      16-Bits HI/LO Data Output Switches Module

16 units slide switches and corresponding output terminals. When switch is set at "down" position, the output is LO level; contrarily, it is to be HI level when setting at "up" position.

9.      TTL/CMOS Selection Switch

       Select TTL or CMOS Mode for data switches

11.   Speaker Module

       8Ohm, 0.25W With Buffer

14.   Potentiometer Module

       With 1K, 100K and 500K Ohm Potentiometers               

13.   Adaptors Module

       2 Channels 4mm Banana and 2 Channels BNC Adaptor

The ADT-7000 is shipped with a comprehensive CD Format Experiments Manual, Instruction Manual with Self Maintenance Guide and a power cord.

Power Supply : 240VAC, 50Hz (Fused Protected)

Dimensions : (W x D x H) 380 x 280 x 90mm

Weight : 3.5 kgs